4
© 2011 Cycle Country Accessories Corporation
BEFORE YOU BEGIN:
Please read and understand all instructions.
Verify all parts and tools are accounted for.
To ensure a satisfactory installation, follow all steps
correctly and in the sequence described.
All directions referring to right and left are when the
rider is sitting on the machine
INSTALLATION NOTES:
TOOLS REQUIRED:
Basic Hand Wrench and Socket Set
Torque Wrench
NOTICE
If your ATV has a previously installed winch system, it must
be removed to install the 25-1200 Winch Mount
INSTALLATION OF WINCH MOUNT:
1. Remove the bumper cover and lower rock guard from
the ATV. See Illustration 1.
2. Remove the two factory bumper bolts located on the
upper portion of the frame. See Illustration 2.
ILL. 1
Honda
Foreman/Rubicon
Frame
Rock Guard
Bumper Cover
ILL. 2
Factory
Fasteners
NOTICE
Factory fasteners are not re-used
