5
© 2011 Cycle Country Accessories Corporation
3. Place the winch mount bracket, Item #8 on the frame
supports as shown in Illustration 2. Insert winch
mount at an angle through the front of the frame, then
place on top of bumper supports. See Illustration 3.
4. Place bushings, Item #6, between the left and right
bumper support mount holes and the winch mount.
Place washers, Item #2 over the mount holes and
fasten with metric bolts, Item #7. Do not tighten
fasteners at this time. See Illustration 4.
ILL. 3
1
1
ILL. 4
6
2
7
NOTICE
Do not re-use factory bumper fasteners at this location
