WARN INDUSTRIES
PAGE 1
84855A2
INJURY HAZARD
Failure to observe these instructions could lead to severe injury or death.
Always
use extreme caution when drilling on any vehicle. Make sure that all fuel lines, brake lines, electrical
wires, and other objects are not punctured or damaged when / if drilling on the vehicle. Thoroughly inspect
the area to be drilled (on both sides of material) prior to drilling, and relocate any objects that may be dam-
aged. Failure to inspect the area to be drilled may result in vehicle damage, electrical shock, fire or personal
injury.
Always
wear safety glasses when installing this kit. A drilling operation will cause flying metal chips. Flying
chips can cause eye injury.
Always
use extreme caution when cutting and trimming during fitting.
Always
remove jewelry and wear eye protection.
Never
lean over battery while making connections.
Never route electrical cables:
Across any sharp edges.
Through or near moving parts.
Near parts that become hot.
Always
insulate and protect all exposed wiring and electrical terminals.
Always
install terminal boots as directed in installation instructions.
Always
use appropriate and adequate care in lifting components into place.
Always
insure components will remain secure during installation and operation.
Always
tighten all nuts and bolts securely, per the installation and operation.
Always
perform regular inspections and maintenance on the winch, winch mount and related hardware.
Never
operate this
WARN
product with damaged or missing parts.
WARNING
INSTALLATION INSTRUCTIONS
MOUNTING KIT
Part Number:
84704
Application:
Honda Rancher TRX420
Your safety, and the safety of others, is very important. To help you make informed decisions about
safety, we have provided installation and operating instructions and other information on labels and in
this guide. This information alerts you to potential hazards that could hurt you or others. It is not possible
to warn you about all potential hazards associated with this product, you must use your own good judg-
ment.
CARELESS INSTALLATION AND OPERATION CAN RESULT IN SERIOUS INJURY OR EQUIPMENT
DAMAGE. READ AND UNDERSTAND ALL SAFETY PRECAUTIONS AND OPERATING INSTRUC-
TIONS BEFORE INSTALLING AND OPERATING THIS PRODUCT.
This guide identifies potential hazards and has important safety messages that help you and others avoid
personal injury or death
. WARNING
and
CAUTION
are signal words that identify the level of hazard. These
signal words mean:
WARNING signals a hazard that could cause serious injury or death, if you do not follow
recommendations.
CAUTION signals a hazard that may cause minor to moderate injury, if you do
not follow recommendations.
This guide uses
NOTICE
to call attention to important mechanical information, and
Note
: to emphasize
general information worthy of special attention.
