Cyclades alterpath pm10, Installation, Administration And User Manual, Page: 99 / 140

Command Line Interface 79
Commands
To reset the maximum temperature registered, use
reset
as a argument, type:
unassign
Removes the assignment of an outlet or group of outlets from a given user.
This command is available to the administrator user only.
Syntax
unassign <outlets> <user>
Arguments
<outlet number>
Outlet number, such as “5”, outlet name such as
“sunfire”, or group of outlets such as “1, 3-5”
<user>
Desired username
Examples
To unassign outlet 2 and 4 from user diderot , type:
pm> temperature reset
IPDU #1: Clearing maximum recorded temperature to
zero.
IPDU #2: Clearing maximum recorded temperature to
zero.
pm> unassign 2,4 diderot
2: Outlet no longer assigned to diderot.
4: Outlet no longer assigned to diderot.