Cyclades alterpath pm10, Installation, Administration And User Manual, Page: 29 / 140

Introduction 9
Models and Components
Console Access through a Management Device
While integrating the PM device with a Cyclades console or KVM
management device such as the AlterPath ACS or the AlterPath OnSite,
remote users can access the AlterPath PM's console port through one of the
following interfaces:
• Menu-driven interface – After using telnet or SSH to access the console
port equivalent to the managed device on the console server, type the
power management hotkey (Ctrl+p by default) to bring up a power
management menu on the same screen.
• Web interface – Once you are logged into the Web Interface of the
management device, access the power management functionality from a
“Power Management” or “IPDU Power Management” tab on the Web
Manager.
See “Integration with Cyclades Management Products” on page 3 for more
background information on integrating a PM with a Cyclades management
device, or refer to the appropriate user documentation for instructions on
accessing the PM console through your specific Cyclades management
device.
Models and Components
General features, which are common among all products, in the AlterPath PM
family are listed below:
• 128 KB flash memory
• 8 KB RAM
• Two RJ-45 RS-232 interfaces
• Digital global current display with 2 digits and 7 segments
• LEDs monitoring ON/OFF status for each port
• Audible over current alarm
• 8-bit Microcontroller-equipped