Tools Required
• Phillips screwdriver
• Stubby Phillips screwdriver
• 6 mm Allen wrench
• 7 mm Allen wrench
• 3/16” Allen wrench
• 7/32” Allen wrench (2)
• 17 mm Open end wrench
• 1/2” Open end wrench
• 9/16” Open end wrench
Lift and Move Unit
1.
Remove lag bolts and shipping supports. Keep package material on linkage arms at this time. This will protect
the paint from scratching during assembly.
2.
Grasp each rear support leg firmly and lift with one person on each side.
3.
Lift the lower rear support legs so the front transport wheels are able to roll on floor.
Use proper lifting methods.
Page 30 of 47
Summary of Contents for R Series
Page 1: ...R Series Arc Trainer Assembly Instructions Part Number 1008301 0001 AC ...
Page 2: ......
Page 47: ......