![background image](http://html.mh-extra.com/html/cybex/r-series/r-series_assembly-instructions-manual_2703507010.webp)
Setup
Read the entire manual before setting up the unit.
Choosing and Preparing Site
Before assembling the unit, verify the chosen site meets the following criteria:
• Area is well lit and well ventilated.
• Surface is structurally sound and properly leveled.
• Free area for access to unit and emergency dismount. Minimum clearance is 23.6 inches (0.6 meters).
• Adjacent units may share the free area.
Free Area - R Series Lower Body
23.6”, 0.6m
1
Free Area - R Series Total Body
23.6”, 0.6m
1
It is the responsibility of the facility owner/owner of the equipment to ensure that there is appropriate clearance
around each machine to allow for safe use and passage.
In compliance with the ADA (American Disabilities Act) there must be clear floor space of at least 30 by 48 inches
and be served by an accessible route for at least one of each type of exercise equipment. If the clear space is
enclosed on three sides (e.g., by walls or the equipment itself), the clear space must be 36 by 48 inches.
All other machines must have a clear floor space of 23" for all access point on the machine.
The dimensions stated in the assembly instructions of this manual include the maximum foot print (in use)
dimensions.
Minimum clearance of 12” (30 cm) between units for proper wireless heart rate signal operation.
Electrical Power Requirements (Applicable for Units Using External Power Supply)
• Units that are only equipped with the 50L console are self powered.
• Units with the 50L console can be used with an optional 12 VDC external power supply. Use of an attachable
TV requires a 12 VDC external power supply.
• Units with the 70T console are required to use a 24 VDC external power supply.
WARNING:
Use only the supplied power brick and line cord. Do not use any modification to connect to a
2-prong outlet. Product must be connected to a properly rated 3-prong outlet.
Output Current
Output Voltage
Frequency
Supply Voltage
Console
3 A or 5 A
12 VDC
47 - 63 Hz
95 - 264 VAC
50L
Page 10 of 47
Summary of Contents for R Series
Page 1: ...R Series Arc Trainer Assembly Instructions Part Number 1008301 0001 AC ...
Page 2: ......
Page 47: ......