![background image](http://html.mh-extra.com/html/cybex/r-series/r-series_assembly-instructions-manual_2703507012.webp)
Check for Console Power
The 50L console is powered by a 12V 7AH battery. The 70T console is plug in only using the 24 VDC power supply.
Check the battery by pressing the
Go / Green Arrow
button. The console should beep and light up. If a prompt
doesn’t appear, mount the unit and begin pedaling. The console should light up and programming a workout
should be possible. Pedal for 10 - 20 minutes at 50 rpm or faster during a workout for optimum battery charging.
The pedal action during workouts keeps the battery charged. Optional external power supply can be used. If the
unit is externally powered, battery maintenance is automatic and pedaling is not required. Use only the power
supply provided by Cybex to insure against unsafe operation.
Cable TV Hook Up
The console can receive both analog and digital signals. CYBEX is not responsible for the installation of CATV
service or components required for the delivery of CATV service. An external TV signal input via a 75-ohm coaxial
cable must be present before TV setup can occur.
Note to the CATV Installer:
This reminder is provided to call the CATV system installer’s attention to Article 820-40
of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall
be connected to the grounding system of the building as close to the point of cable entry as practical.
Page 12 of 47
Summary of Contents for R Series
Page 1: ...R Series Arc Trainer Assembly Instructions Part Number 1008301 0001 AC ...
Page 2: ......
Page 47: ......