Visually Inspect Unit
1.
Remove any packing material from unit.
2.
Examine the unit to ensure that the assembly is correct and complete.
Level Unit
This procedure will level the unit by evenly adjusting the weight on the rear feet. Leveling the unit will eliminate
rocking during use.
NOTE:
References to left and right are from the users perspective during use.
1.
Verify foot plates are completely stopped.
2.
Grasp one of the rear covers and slowly lift the rear foot off the floor. Lower rear foot to the floor.
Qty.
Description
Item
2
Rear Cover
1
1
Left Rear Foot
2
1
Right Rear Foot
3
Lift Here
4
3.
Grasp the other rear cover and slowly lift the rear foot off the floor. Lower rear foot to the floor.
Make note of either rear foot lifting off the floor easier than the other.
If both rear feet lift off the floor evenly, secure both leveling foot jam nuts against the frame post using a 9/16”
open-end wrench. Unit is leveled.
Left leveling foot shown
Qty.
Description
Item
1
Frame Post
1
1
Jam Nut
2
1
Leveling Foot
3
Turn Counter-Clockwise to
Secure
4
Page 25 of 47
Summary of Contents for R Series
Page 1: ...R Series Arc Trainer Assembly Instructions Part Number 1008301 0001 AC ...
Page 2: ......
Page 47: ......
