Qty.
Description
Item
1
Jam nut
1
1
Tension adjustment nut
2
Rod End Adjustment
This type of adjustment uses a socket head cap screw (SHCS) securing a cable rod end bearing to the machine.
Primary adjustment is by turning the rod end bearing. The other end of the cable usually contains a roll pin cable
adjustment.
Qty.
Description
Item
1
Cable end
1
1
SHCS
2
1
Jam nut
3
1
Cable rod end bearing
4
1
Nylon locknut
5
Roll Pin Adjustment
This type of adjustment uses a roll pin and series of holes in the weight stack top weight connector.
Qty.
Description
Item
1
Roll pin
1
1
Top weight connector
2
Cam End Adjustment
This type of adjustment uses an adjustment bolt on the pulley bracket. Loosen nut and rotate cam bolt to adjust
cable.
Page 21 of 25
