3.
Remove screws securing top mount to frame using a Phillips screwdriver.
Qty
Description
Item
6
Screw
1
1
Top mount
2
1
Back panel
3
4.
Slide back panel upward and remove.
Remove weight plates
1.
Turn the increment weight adjusting knob to select 0 lbs (0 kg).
2.
Remove top guide rod caps. Top guide rod cap contains a compression spring that will fly if grasp is not
released slowly. Slide spring loaded top guide rod cap down guide rod until cap is clear of frame. Slowly release
grasp of top guide rod cap and set aside.
Qty
Description
Item
2
Top guide rod cap
1
2
Guide rod
2
1
Guide rod plate
3
3.
Repeat above step for opposite guide rod.
4.
Lean guide rods slightly outward, away from machine. DO NOT put excessive pressure on guide rods, it will
damage lower guide rod caps.
5.
Slide top weight up and out of the machine and set aside.
6.
Remove weight plates and set aside for re-installation later.
7.
Move to desired location.
Install weight plates
1.
Lean guide rods slightly outward, away from machine, DO NOT put excessive pressure on guide rods, it will
damage lower guide rod caps.
2.
Wipe the entire length of the guide rods with a clean cloth.
3.
Lubricate the guide rods with a light coating of medium weight oil.
Page 12 of 25
