7. Install cable clip securing the cable to the cam.
Item
Description
Qty.
1
Cable Clip
1
2
Cable
1
3
Cam
1
8. Install screws, washers, and jam nuts securing the cam and kicker stop to the work arm assembly using a 7mm Allen wrench and
16mm wrench.
Item
Description
Qty.
1
Cam
1
2
Kicker Stop
1
3
Work Arm Assembly
1
4
Screw, M10 x 1.5, 40mm, Low Head
3
5
Washer, Flat 3/8"
6
6
Nut, M10 x 1.5, Hex Jam
3
Tighten hardware to 20-25 ft-lb (27.1-33.9 Nm).
Install Front and Top Caps
1. Set front shrouds into the bottom cap. Install screws securing the front cap to the tower frame using a 10 mm wrench.
Item
Description
Qty.
1
Front Cap
1
2
Front Shroud, Left
1
3
Front Shroud, Right
1
4
Screw, M6, HCS, 50 mm
4
Tighten hardware to 10-13 in-lb (1.1-1.5 Nm).
Page 23 of 36
