8. Install screws and washers securing the seat frame to the main frame using an 8mm Allen wrench.
Item
Description
Qty.
1
Seat Frame
1
2
Main Frame
1
3
Pivot Shaft, 19mm
1
4
Screw, M10 x 1.5, 25mm
2
5
Washer, Flat 3/8"
2
Tighten hardware to 20-25 ft-lb (27.1-33.9 Nm).
NOTE:
Slide bumper sleeve on the seat frame behind the main frame back pad weldment when installing.
Assemble Tower
1. Install the increment weight bumper to the bottom plate of the tower frame.
Item
Description
Qty.
1
Increment Weight Bumper
1
2
Tower Frame
1
Page 13 of 36
