7. Install screws and washers securing the bottom cap to the bottom of the tower frame using an 8mm Allen wrench.
Item
Description
Qty.
1
Bottom Cap
1
2
Screw, M10 x 1.5, 20mm
2
3
Washer, Flat 3/8"
2
Tighten hardware to 8-10 ft-lb (10.8-13.5 Nm).
8. Install screws and shroud retainer grommets into the side tubes of the tower frame using a Phillips screwdriver.
Item
Description
Qty.
1
Grommet, Shroud Retainer
6
2
Screw, M4.2 x 0.7, Phillips
6
Tighten hardware to 10-13 in-lb (1.1-1.5 Nm).
9. Slide weight stack cushions onto the guide rods.
Page 15 of 34