5. Install screws securing seat glide bushing to main frame using a Phillips screwdriver.
Item
Description
Qty.
1
Seat Post Assembly
1
2
Seat Glide Bushing
1
3
Seat Frame
1
4
Screw, M5 x 10, Phillips
2
Tighten hardware to 30-39 in-lb (3.4-4.4 Nm).
6. Install screws and washers securing the overhead frame assembly to the tower frame using an 8mm Allen wrench.
Item
Description
Qty.
1
Overhead Frame Assembly
1
2
Screw, M10 x 1.5, 25mm
8
3
Washer, Flat 3/8"
8
Tighten hardware to 20-25 ft-lb (27.1-33.9 Nm).
7. Install screws, washers, and locknuts securing the pulleys to the pulley brackets on the tower frame using an 8mm Allen wrench
and a 17mm wrench.
Item
Description
Qty.
1
Pulley, 3.5" OD
4
2
Screw, M10 x 1.5, 45mm
2
3
Screw, M10 x 1.5, 50mm
2
4
Washer, Flat 3/8"
6
5
Nut, M10 x 1.5, Hex Nylock
2
Tighten hardware to 8-10 ft-lb (10.8-13.5 Nm).
Page 12 of 34
