15. Select either the LBS or KG weight stack label. Remove backing from label and apply to weight stack.
NOTE:
One weight stack label sheet, LBS or KG, is used for both weight stacks.
Item
Description
Qty.
1
Weight Stack Label
1
2
Weight Stack
1
16. Install screws securing the front cap to the tower frame using a 10mm socket wrench and ratchet.
NOTE:
Screw heads can be accessed from the top or bottom.
Item
Description
Qty.
1
Front Cap
1
2
Screw, M6, HCS, 50mm
4
Tighten hardware to 10-13 in-lb (1.1-1.5 Nm).
17. Press grommets into holes at the top of the tower frame.
18. Install screws securing the tube caps to the tower frame using a Phillips screwdriver.
Item
Description
Qty.
1
Top Cap
1
2
Tube Cap
2
3
Screw, 8 x ¾", Phillips
1
4
Grommet
1
Tighten hardware to 10-13 in-lb (1.1-1.5 Nm).
19. Press top cap down into the holes at the top of the tower frame.
Page 18 of 34
