![background image](http://html.mh-extra.com/html/cybex/625t/625t_owners-manual_2703480018.webp)
Remove shield
1.
Loosen but do not remove the two front cover screws securing the motor cover using a Phillips
screwdriver.
Qty.
Description
1
Motor cover
1
1
Front cover
2
2
Screws
3
2.
Remove motor cover by lifting vertically.
3.
Loosen but do not remove the seven screws securing the shield to the base using a Phillips
screwdriver.
Qty.
Description
1
Base
1
7
Screws
2
1
Shield
3
4.
Remove shield by sliding sideways and then vertically off of base.
Route power cord
Decide whether you will plug the power cord into a power outlet near the front of the treadmill or the
back of the treadmill. Follow the corresponding routing procedure below. Do not plug the power cord
into a power outlet at this time.
Shock and electrocution hazard.
• Route power cord so it does not become damaged.
• Do not allow cord to be pinched or interfere with movement of treadmill.
Page 18 of 88
Cybex 625T Treadmill Part Number LT-23221-4 H