CYBEX 600T, Service Manual

Page: 6 / 55

Pageiv
Cybex 600T Treadmill Service Manual
About This Manual
For your convenience, all measurements and voltage requirements are listed in both English
and metric units. English values are listed first, followed by metric units in parentheses. For
example: 1" (2.54 cm).
An Owner's Manual is shipped with each 600T Treadmill. To purchase a copy of the Service
Manual contact Cybex Customer Service at 888-462-9239 or 508-533-4300.
To contact Cybex with comments about this manual you may send email to
techpubs@cybexintl.com.
Important Voltage Information
Before you assemble your 600T, check to make sure that the treadmill has the correct voltage
requirements for your area, and that you have the correct model.
To check for the correct model and voltage requirements, locate the serial number label and
voltage label. Your serial number can be found on the rear crossbar under the running deck.
The voltage of your treadmill can be found on a label near the on/off (I/O) switch.
The power requirements for this treadmill are 115 VAC ±10%, 60 Hz and 20 amps or a 220
VAC ±15%, 50 Hz/60 Hz and 15 amps grounded, dedicated circuit.
! WARNING: Do not attempt to use this unit with a voltage adapter.
!
WARNING: Do not attempt to use this unit with an extension cord.
FCC Compliance Information
! WARNING: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.