CyberResearch MPE 06, User Manual

Page: 61 / 98

CyberResearch
®
Displays MPE Series
CyberResearch, Inc . 61
25 Business Park Drive P: (203) 643-5000; F: (203) 643-5001
Branford, CT USA www.cyberresearch.com
or cabinet. Refer to Section
4
5.5.1.1 for details.
2. The MPE 06 monitor uses panel mounting clamps for installation into a rack
or cabinet. Refer to Section
4
5.5.1.2 for details.
5.5.2.1 Standard Cabinet and Rack Installation
The standard cabinet/rack mounting procedure applies to the following MPE series LCD
monitors:
ƒ
MPE 12
ƒ
MPE 10
To mount the MPE series LCD monitor into a cabinet/rack, please follow the steps below.
Step 1: The back of the metal frame surrounding the MPE series LCD monitor has
several retention screw holes for a cabinet/rack installation bracket.
NOTE:
When purchasing a cabinet/rack installation bracket, make sure it is
compatible with both the monitor and the cabinet/rack into which the
monitor is installed.
Step 2: Slide the monitor through the cabinet/rack bracket until the rear side of the
monitor frame is flush against the front of the bracket.
Step 3: Make sure the retention screw holes at the rear of the monitor frame are aligned
with the retention screw holes in the cabinet/rack bracket.
Step 4: Secure the cabinet/rack bracket to the monitor by inserting and tightening the
retention screws (
4
Figure 5-12 ).