CyberResearch MPE 06, User Manual

Page: 70 / 98

MPE Series
CyberResearch
®
Displays
70 ©Copyright 2011 CyberResearch, Inc.
5.5.6 Monitor Arm Installation
The MPE series LCD monitor has Video Electronics Standards Association (VESA)
standard mounting holes tapped into the rear panel. The standard holes are M4 set at
100m x 100mm apart (
4
Figure 5-21 ). The monitor arm mounting plate has a matching
VESA hole pattern. To mount the MPE series LCD monitor onto a monitor arm, please
follow the steps below.
Step 1: Line up the threaded holes on the monitor rear panel with the screw holes on the
monitor arm mounting plate.
Step 2: Secure the monitor to the arm with the supplied retention screws (
4
Figure 5-23 ).
Step 0:
Figure 5-23: Monitor Arm Mounting