CyberResearch CVBF 21C, User Manual

Page: 46 / 64

C
Y
RAQ
®
21
CyberResearch
®
Displays
4.2.3
Calibration Routine
1. Click/touch the calibration target seen in Figure 23 to begin calibration routine.
Figure 23: Calibration Target
2. Follow the on-screen prompts to complete calibration process.
Once you have selected the large calibration target from the control panel, the
calibration program will begin.
3. As each target is displayed on the screen TOUCH and hold the center of each
target as directed by the text located adjacent to each target.
4. Touch the center of each target as accurately as possible.
Hampshire calibration targets have been specially developed to assist you in calibrating
your touchscreen as accurately as possible.
5. As each target is displayed, touch and hold the center of each calibration target
until it shrinks and the Hold text changes to Release.
The calibration screen will automatically time out and return you to the control panel if
the first point is not touched within 10 seconds. This time-out feature has been added to
the calibration program to insure that you can exit the calibration screen in the event that
you have a damaged our disconnected touchscreen. This time-out feature may also be
configured for other time-out values.
38 ©
Copyright 2009
CyberResearch, Inc