CyberResearch CEGC Series User Manual Download Page 98

Page: 98 / 282

CEGC Series

CyberResearch

CPU Cards

CyberResearch, Inc.

4 TXC+

8 TXD-

Table

Error! No text of specified style in document.

-23:

LAN Pinouts

Figure

Error! No text of specified style in document.

-41: RJ-45

Ethernet Connector

The RJ-45 Ethernet connector has two status LEDs, one green and one yellow. The green

LED indicates activity on the port and the yellow LED indicates the port is linked. See

Table Error! No text of specified style in document.

-24.

STATUS

DESCRIPTION

STATUS

DESCRIPTION

ORANGE 10/100

LAN

YELLOW

Linked

GREEN GbE

LAN

Table

Error! No text of specified style in document.

-24: RJ-45 Ethernet

Connector LEDs

4.3.2 USB Connector

CN Label:

USB_1 and USB_2

CN Type:

USB port

CN Location:

See Figure Error!

No text of specified style in document.

-40

CN Pinouts:

See Table Error!

No text of specified style in document.

-25

The CEGC has four external USB 2.0 ports. The ports connect to both USB 2.0 and USB

1.1 devices.

Summary of Contents for CEGC Series











































































































































































































































































Search results

Summary of Contents for CEGC Series

Reviews:

CyberResearch CEGC Series, User Manual, Page: 98 / 282

Search results

Summary of Contents for CEGC Series

Reviews: