CyberResearch CEGC Series, User Manual, Page: 109 / 282

CyberResearch
®
CPU Cards CEGC Series
CyberResearch, Inc
. 87
25 Business Park Drive P: (203) 643-5000; F: (203) 643-5001
Branford, CT USA www.cyberresearch.com
Figure Error! No text of specified style in document. -44: Remove the CPU Socket
Protective Shield
Step 2: Open the socket . Disengage the load lever by pressing the lever down and
slightly outward to clear the retention tab. Rotate the load lever to a fully open
position. Then rotate the load plate towards the opposite direction.
See Figure Error! No text of specified style in document. -45.
Figure Error! No text of specified style in document. -45: Open the CPU Socket Load
Plate
Step 3: Inspect the CPU socket Make sure there are no bent pins and make sure the
socket contacts are free of foreign material. If any debris is found, remove it with
compressed air.
Step 4: Orientate the CPU properly . Make sure the IHS (Integrated Heat Sink) side is
facing upward.
Step 5: Correctly position the CPU. Match the Pin 1 mark with the cut edge on the
CPU socket.
Step 6: Align the CPU pins. Locate pin 1 and the two orientation notches on the CPU.
Carefully match the two orientation notches on the CPU with the socket
alignment keys.