CyberResearch CEGC Series User Manual Download Page 142

Page: 142 / 282

CEGC Series

CyberResearch

CPU Cards

120

CyberResearch, Inc.

IDE D

EFAULT

The drive connected to the nth SATA port is configured as an IDE

drive

RAID

The SATA drive connected to the nth SATA drive port is specified

as a SATA drive that is part of a RAID array

AHCI

The SATA drive connected to the nth SATA drive port is specified

as a normal SATA drive.

IDE Master and IDE Slave

When entering setup, BIOS auto detects the presence of IDE devices. BIOS displays the

status of the auto detected IDE devices. The following IDE devices are detected and are

shown in the

IDE Configuration

menu:

Primary IDE Master

Primary IDE Slave

Secondary IDE Master

Secondary IDE Slave

The

IDE Configuration

menu (

BIOS Menu 4

) allows changes to the configurations for the

IDE devices installed in the system. If an IDE device is detected, and one of the above

listed four BIOS configuration options are selected, the IDE configuration options shown in

Section 6.3.2.1

appear.

6.3.2.1 IDE Master, IDE Slave

Use the

IDE Master

and

IDE Slave

configuration menu to view both primary and

secondary IDE device details and configure the IDE devices connected to the system.

Summary of Contents for CEGC Series











































































































































































































































































Search results

Summary of Contents for CEGC Series

Reviews:

CyberResearch CEGC Series, User Manual, Page: 142 / 282

Search results

Summary of Contents for CEGC Series

Reviews: