CyberPower SM180KMFX, User Manual

Page: 41 / 72

33
SM 180-600 KMFX User Manual
Chapter 3 LCD Panel
Indicator State Description
Off Rectifier not operating
Battery
indicator
Steady green Battery charging
Flashing green Battery discharging
Steady red
Battery abnormal (battery failure, no battery or battery reversed) or
battery converter abnormal (failure, over current or over
temperature) , EOD
Flashing red Battery low voltage
Off Battery and battery converter normal, battery not charging
Bypass
indicator
Steady green Load supplied by bypass
Steady red Bypass abnormal or out of normal range, or static bypass switch fault
Flashing red Bypass voltage abnormal
Off Bypass normal
Inverter
indicator
Steady green Load supplied by inverter
Flashing green
Inverter on, start, synchronization or standby (ECO mode) for at least
one module
Steady red
System output not supplied by inverter, inverter fault for at least one
module.
Flashing red
System output supplied by inverter, inverter fault for at least one
module.
Off Inverter not operating for all modules
Load
indicator
Steady green UPS output ON and normal
Steady red UPS overload time is out, or output short, or output no power supply
Flashing red Overload output of UPS
Off No output of UPS
Status
indicator
Steady green Normal operation
Steady red Failure
There are two different types of audible alarm during UPS operation, as shown in Table 3.4.
Table 3.4 Description of audible alarm
Alarm Description
Two short alarm
with a long one
when system has general alarm (for example: AC fault),
Continuous alarm
When system has serious faults (for example: fuse blown or hardware
failure)
3.3.2 Control and Operation Keys
Control and operation keys include four keys of 2, 10, 11 and 12(See Fig.3-3), which are used
together with LCD touch screen. The functions description is shown in Table 3.5.
Table 3.5 Functions of Control and operation keys
Function Key Description
EPO
Long press
，
cut off the load power (shut down the rectifier, inverter,
static bypass and battery)
BYP
Long press
，
transfer to the bypass (Push the button up in the back of
the door to enable , see Fig.5.2)