10
User Guide
Defaults
Default IP address to access NetGenie: http://10.1.1.1
Default Username: admin
Default Password: admin
Appliance Reset Button: To reset appliance to factory default settings, keep the reset key pressed
for 5 seconds. While doing so, all past upgrades and configurations will be lost.
Surf using NetGenie
Prerequisites
:
Internet connectivity through a DSL/Cable modem/Direct Internet Cable with RJ45
(Ethernet) connection or USB Modem.
At least one computer with an installed network interface adapter/wireless network adapter.
Internet browser.
Getting your NetGenie Ready
1. Before you begin surfing the Internet through NetGenie, you first need to assemble the
appliance.
2. Screw in detachable Wi-Fi antennas in their respective jacks provided in the back panel.
3. Look out for a sticker at the bottom of the appliance containing the default wireless network
name, technically known as SSID and a pass key specific for your appliance.
4. Plug one end of the power adapter into the socket on the back of the NetGenie Base Unit.
5. Plug the other end of the power adapter into the nearest main socket.
6. Before you access the Internet through NetGenie, make sure the power is switched on. The
Power LED on the front panel should turn green.
Note
:
SSID and pass key pre-secure your wireless network from any unauthorized access attempts.
Please note down your pass key for future reference.
Identify your Home Internet Setup
Depending on your home network set-up, you can connect NetGenie to the Internet by referring to
any of the following scenarios:
1.
Through ADSL Cable Modem
2.
Through Direct Cable
3.
Through USB Modem
4.
Over Wi-Fi
