CyberData 10935, Operation Manual, Page: 83 / 94

Mount the Intercom
Operations Guide 930242A-D CyberData Corporation
77
If the thread on the conduit is longer than 3/8 inch, then a stop nut (not supplied) is required.
Otherwise, use the outlet box plug to plug the exit hole.
Note Apply good quality waterproof sealant to all threads.
Figure A-3. Mounting the VoIP Intercom Assembly
Figure A-4 shows the restrictions of the conduit going into the box.
Figure A-4. Conduit Restrictions
OR
CONDUIT
HOLE PLUG
Apply good quality waterproof
sealant to all threads.
Not to Exceed 0.1"
CONDUIT
(1/2”)