manualshive.com logo in svg

CyberData 10935, Operation Manual, Page: 71 / 94

Share
Download
CyberData 10935 Operation Manual Download Page 71

 

Installing the VoIP Intercom

Intercom Setup

Operations Guide

930242A-D

CyberData Corporation

65

2.3 Upgrade the Firmware and Reboot the Intercom

Note

To guard against failed firmware upgrades, units shipped from CyberData with firmware 
version 5.1.2 and later feature a built-in "fail safe" mechanism. Note that field upgrading 
earlier units with v5.x.x will not allow for this feature.

Note

Any units that have shipped with firmware version 6.0.0 or later will not be able to run 
firmware that is version 5.1.2 or earlier.

To upload the firmware from your computer:

1. Retrieve the latest Intercom firmware file from the VoIP Intercom 

Downloads

 page at: 

http://www.cyberdata.net/products/voip/digitalanalog/intercom/downloads.html

2. Unzip the firmware version file. This file may contain the following:

•

Firmware file

•

Release notes

3. Log in to the Intercom home page as instructed in 

Section 2.2.2, "Log in to the Configuration 

Home Page"

.

4. Click the 

Update Firmware

 button to open the 

Upgrade

 

Firmware 

page. See 

Figure 2-32

.

Caution

When upgrading to firmware version 6.x.x from version 5.x.x or earlier, your 
device configuration settings will be lost because the way that the device stores 
the configuration settings is different in version 6.x.x.

GENERAL ALERT

Summary of Contents for 10935































































































Reviews:

No comments