manualshive.com logo in svg

CyberData 10935, Operation Manual, Page: 11 / 94

Share
Download
CyberData 10935 Operation Manual Download Page 11

 Product Overview

How to Identify This Product

Operations Guide

930242A-D

CyberData Corporation

5

1.4 Supported Protocols

The Intercom supports: 

●

SIP

●

HTTP Web-based configuration

Provides an intuitive user interface for easy system configuration and verification of Intercom 
operations.

●

DHCP Client 

Dynamically assigns IP addresses in addition to the option to use static addressing.

●

TFTP Client

Facilitates hosting for the Autoprovisioning configuration file.

●

RTP

●

RTP/AVP - Audio Video Profile

●

Facilitates autoprovisioning configuration values on boot

●

Audio Encodings

PCMU (G.711 mu-law)

PCMA (G.711 A-law)

Packet Time 20 ms

1.5 Supported SIP Servers

Go to the following link to find the VoIP Intercom product page which will have information on how to 
configure the VoIP Intercom for various supported SIP servers:

http://www.cyberdata.net/support/server/index.html

Summary of Contents for 10935































































































Reviews:

No comments