Installing the VoIP Intercom
Intercom Setup
Operations Guide
930242A-D
CyberData Corporation
25
2.1.9 Adjust the Volume
You can adjust the volume through the
Speaker Volume
setting on the
Device Configuration Page
.
2.2 Configure the Intercom Parameters
To configure the Intercom online, use a standard web browser.
Configure each Intercom and verify its operation
before
you mount it. When you are ready to mount
an Intercom, refer to
Appendix A, "Mounting the Intercom"
for instructions.
All Intercoms are initially configured with the following default IP settings:
When configuring more than one Intercom, attach the Intercoms to the network and configure one at
a time to avoid IP address conflicts.
Parameter
Factory Default Setting
IP Addressing
DHCP
IP Address
a
a. Default if there is not a DHCP server present.
10.10.10.10
Web Access Username
admin
Web Access Password
admin
Subnet Mask
a
255.0.0.0
Default Gateway
a
10.0.0.1
Table 2-4. Factory Default Settings