CyberData 011433, Operation Manual, Page: 45 / 98

Operations Guide 931384A CyberData Corporation
Installing the Secure Access Control Keypad
Secure Access Control Keypad Setup
38
2. On the Configure Security Code page, you may enter values for the parameters indicated in
Table 2-12 .
Web Page Item Description
Security Configuration
Name Enter name.
Code Enter a security code, maximum 8 digits, must be distinct.
Valid From See Section 2.4.6.2, "The “Valid From” and “Valid To”
Settings" .
Valid To See Section 2.4.6.2, "The “Valid From” and “Valid To”
Settings" .
Blacklist Blacklist is used to deny entry to the specified security
code. Entering a blacklisted code will trigger the buzzer,
and can trigger a call to an extension or a multicast of a
pre-recorded message.
Saves the changes of the security configuration.
Cancels the changes of the security configuration.
Table 2-13. Security Code Page Parameters