CyberData 011433, Operation Manual, Page: 21 / 98

Operations Guide 931384A CyberData Corporation
Installing the Secure Access Control Keypad
Secure Access Control Keypad Setup
14
2.3.3.4 Door Strike Relay Module Wiring Diagram from the Device
For wiring an electronic door strike, we recommend the use of our external Door Strike Relay Module
(CD# 011269).
This product provides an easier method of connecting standard door strikes as well as AC and
higher voltage devices. See
Figure 2-6 for the wiring diagram.
Figure 2-6. Door Strike Relay Module Wiring Diagram from the Device
If you have questions about connecting door strikes or setting up the web configurable options,
please contact our support department at the following website:
http://support.cyberdata.net/
Door Lock Sense Input
The terminal block can accept 16 AWG stranded wire.
DC Source
AC Source
OR
+
1
8
Terminal Block
See the Door Strike Relay Module Operations
Guide for connection specifics.
See Section 2.4.12, "Configure the Door Strike
Relay" for configuration options.