CyberData 011313, Operation Manual, Page: 30 / 42

POE Clock Messages
Operations Guide 931080C CyberData Corporation
23
2.1.8 Load Configuration Command
POE Clock will accept a UDP Broadcast to port 10004 to Load Configuration. If the Load
Configuration packet is accepted, POE Clock responds by sending a Confirmation packet to the IP
and Port which sent the Load Configuration command. If the Change packet is rejected, POE Clock
responds with a Rejection packet.
Table 2-8. Load Configuration Command
From >
To
Content Comment
Host >
Device
<XML>\n
<PacketType>LoadConfiguration</PacketType>\n
<VendorName>CyberData</VendorName>\n
<ProductName>CDNetDevice</ProductName>\n
<ProductType>CDPOEClock</ProductType>\n
<MacAddr>00:50:C2:02:0F:0D</MacAddr>\n
<SerialNum>313000001</SerialNum>\n
<Sequence>1</Sequence>\n
<DevName>CDPOEClock0001</DevName>\n
<IPAddr>192.168.6.23</IPAddr>\n
<CMDPort>30998</CMDPort>\n
<SubnetMask>255.255.255.0</SubnetMask>\n
<Gateway>192.168.6.1</Gateway>\n
<DNS1>192.168.6.1</DNS1>\n
<DNS2>0.0.0.0</DNS2>\n
<DHCP>Enabled</DHCP>\n
<DNSHostName>CDPOEClock</DNSHostName>\n
<Announce>0</Announce>\n
<Intensity>Auto</Intensity>\n
<Colon>Flash</Colon>\n
<Format>24</Format>\n
<Time>11:00:20</Time>\n
<TZ>UTC-08:00</TZ>\n
<DSTOF>01:00</DSTOF>\n
<DSTBE>M3.2.0/02:00:00,M11.1.0/02:00:00</DSTBE>\n
<Date>4/18/2015</Date>\n
<NTPUpdate>False</NTPUpdate>\n
Dump
Request