PoE Digital Clock Configuration Utility
Test Monitor Dialog
Operations Guide
931080C
CyberData Corporation
10
On the Test Monitor Dialog, you may enter values for the parameters indicated in
.
Table 1-3. Test Monitor Dialog Items
Item
Function
Firmware Load
Click this button to update PoE Digital Clock firmware. A standard Windows file dialog
appears. Navigate to the firmware upgrade file and click
Open
. Firmware will be sent to
PoE Digital Clock from the file. Load progress will be presented at the large progress panel
at the bottom of the dialog. At the end of firmware load, PoE Digital Clock must reboot
which will take some seconds to complete. The following dialog appears:
Wait 15 seconds for the PoE Digital Clock to implement configuration changes, and then
click on the
OK
button. A scan of PoE Digital Clocks will automatically be started and the
) will appear.
Get Status
Continuous status may be obtained by clicking the
button. Stop continuous
status by clicking
again. Raw Status Response is displayed at the large
progress panel at the bottom of the dialog.
Configuration Dump
The PoE Clock configuration may be saved to an ordinary text file by clicking this button. A
standard Windows file dialog appears. Navigate to a directory that the configuration text file
is to be saved and click the
Save
button. The PoE Clock configuration will be saved to a
disk file. The configuration file may then be used as a template by configuration software to
propagate PoE Clock configuration from one to many clocks.
The configuration file used as input to the
command must be prepared
by software familiar with details of the infrastructure of a specific PoE Clock installation. For
example, if Static IP is to be assigned, a unique IP must be provided. Also, the <DevName>
value should be unique (i.e. Shipping, Engineering, Kitchen, etc.). However, if the
<DevName> value is not unique, then there will be no effect on the function of the PoE
Clock.
Corrected values for Date & Time should be substituted for the values acquired from the
Dump Configuration template. The addition of the "<NTPNOW>True</NTPNOW>" line to
the template will trigger an automatic update of the
Date & Time
setting if there is internet
access after the
Configuration Load
The PoE Clock configuration may be loaded from an ordinary text file by clicking this button.
A standard Windows file dialog appears. Navigate to the location of the configuration text
file and click the
Open
button. The PoE Clock configuration will be loaded from the disk file.
Precautions detailed by the
command should be observed in order
that the contents of the Configuration Load text file are appropriate. The PoE Configuration
Utility does not audit the configuration load file prior to issuing a
command. Software familiar with details of infrastructure of a PoE Clock installation should
prepare the configuration load file prior to use as input to a
command by
the PoE Configuration Utility.
Format
Click 12 or 24 hour format button to select desired format.
Colon
Click the desired colon button to select colon appearance.