Cyberbank PC-EPhone, User Manual

Page: 22 / 45

Getting Started Page 2-5
When you are not using your PC-EPhone, turn it off using the
Power button so that the battery can be used more efficiently.
Even when the power is turned off, power is continuously
supplied to the
Phone so you may receive incoming calls. To
turn the power supplied to the phone completely off, press the
END/PWR button on the phone screen for about 3 seconds and
no data will be shown on the CDMA Status Display as the
phone program is turned off.
2. Record button
Used to run the recording program or control recording functions. More specifically,
when the PC-EPhone is turned on you can run the recording program by pressing
this button, and another press will start recording. Also, you can stop recording by
pressing this button while recording.
3. Phone button
Used to run the Phone program or control phone calls.
z How to run the Phone program
- When your PC-EPhone is turned off, first press the Power button then
press the Phone button to run the Phone program on your PC-EPhone.
- You can run the Phone program by pressing the Phone button when
your PC-EPhone is on. When pressing the Phone button, the last
number you dialed will appear on the Phone program screen. At this
time, pressing the Phone button again will connect you to that phone
number.
z How to control Phone Calls
- To receive an incoming call to your PC-EPhone, press the Phone button
as you would with a cellular phone. If you press the Phone button
during a phone call, the call will be disconnected.
4. Buzzer
The phone bell rings on the arrival of a call.