CWT CWTLAM-160, Use And Maintenance Manual

Page: 5 / 60

6.5 Emergency buttons 37
6.6 RESET button 38
6.7 Manual upper roller movement lever 38
6.8 Roller clutch adjustment knobs 38
7 Use 39
7.1 Putting into service 39
7.2 Starting processing 39
7.3 Manual controls 39
7.4 Cycle stop 40
7.5 Emergency stop 40
7.6 Restart after an emergency stop 40
7.7 Re-start after a black-out 40
7.8 Shut-down 41
7.9 Machine in safe conditions for various operations 41
7.9.1 Safely restarting the machine 41
7.10 Path diagrams of the material and the finished product 42
7.10.1 Spindle shaft definitions 42
7.10.2 Cold protective film lamination on sheets or rolls 43
8 Maintenance 45
8.1 General warnings 45
8.2 Descriptions of the symbols used in the maintenance chapter 46
8.3 Routine maintenance 46
8.3.1 Routine maintenance summary table 46
8.3.2 General cleaning 47
8.4 Special maintenance 48
8.5 Oils and lubricants 48
EXPRESS
USE AND MAINTENANCE MANUAL
EN
MANUAL CODE: 771027010
REVISION: 0
DATE: 29/11/2018
FLEXA S.r.l. - Partial or whole reproduction prohibited without authorisation