CWT CWTLAM-160, Use And Maintenance Manual

Page: 31 / 60

●
●
●
5 Installation instructions
5.1 Environmental conditions and preparation for installation
The area where the machine is to be installed must allow for a good support base, good natural and/or artificial lighting
(according to current regulations) that guarantees that the operator has good visibility over the work and can monitor the area
surrounding the machine so as to prevent the approach of third parties.
The machine has been designed and built to work in normal environmental conditions in industrial warehouses as required by
current legislation.
Consult the technical data and diagrams provided to determine the type, cross-section and position of the power supply cable
and the supply lines of the various lines.
5.2 Checks before installation
Prerequisites necessary for installation:
Check that all agreed arrangements are respected.
Check that the lighting system is adequate.
Check that flooring meets the agreed specifications.
Installation operations and the first machine start-up are carried out by FLEXA S.r.l.
Caution
The machine must not be installed if it shows obvious signs of damage.
In the case of special provisions, layouts and characteristics are provided in the contract phase that must be complied
with, as regards foundation, connections and environmental conditions.
Danger
The machine must not be installed in partially or totally explosive atmospheres.
See technical data par. 2.4
Prior to delivery of the machine, FLEXA S.r.l. provides the Customer with the necessary information and specifications
in order to prepare the areas where the machine will operate.
EXPRESS
USE AND MAINTENANCE MANUAL
EN
MANUAL CODE: 771027010
REVISION: 0
DATE: 29/11/2018
FLEXA S.r.l. - Partial or whole reproduction prohibited without authorisation
25