CWT CWTLAM-160, Use And Maintenance Manual

Page: 52 / 60

8.2 Descriptions of the symbols used in the maintenance chapter
This paragraph describes the symbols used in the maintenance chapter.
8.3 Routine maintenance
Routine maintenance is the set of operations that must be performed at a defined frequency. They are intended to keep the
machine in good operating condition.
8.3.1 Routine maintenance summary table
Abbreviations for types of interventions: E = Electrical; M = Mechanical; S = Software
Icon used Description
Mechanical type intervention
Electrical type intervention
Specifies the frequency of interventions
Caution
Perform routine maintenance with precision and at the frequency indicated by the manufacturer.
The table reported in the paragraph 8.3.1 "Routine maintenance summary table" indicates all the recommended
interventions, indicates the frequency with which they will have to be performed and, in the last column, shows the
paragraph describing the procedure to be performed for the operation.
Routine maintenance table
Type Description Frequency Reference
M General cleaning Daily 8.3.2
EXPRESS
USE AND MAINTENANCE MANUAL
EN
MANUAL CODE: 771027010
REVISION: 0
DATE: 29/11/2018
FLEXA S.r.l. - Partial or whole reproduction prohibited without authorisation
46