manualshive.com logo in svg

CWSI CP-3500D, Operating And Installation Instruction Manual

Share
Download
CWSI CP-3500D Operating And Installation Instruction Manual Download Page 45

 

P/N IM-C35KD Rev. C 

 2014 Commercial Wireless Systems International, LLC. 

45 

The Ignored units are devices that have been moved from the unknown unit list to the ignored unit 
list. Moving a device to the ignored list requires a manual button press and will never occur 
automatically. Devices moved to the ignored list will no longer show an unknown device trouble. This 
feature can be handy if you need to delete a device from the CP-3500D and cannot physically locate 
it to remove the battery. This should not be common practice and only used as a last resort. 

Warning: An alarm, supervisory or trouble received from a device on the unknown list will be 
displayed as an unknown unit trouble. 

 

 
4.9.1 Displaying the Unknown Unit Screen 

The unknown units list can be displayed by pressing the PROGRAM soft key then select the 
Unknown Units menu item and press ENTER. The following is an example of one device being 
displayed on the unknown units screen. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
The unknown device serial number will be displayed on the left and the serial number of the repeater 
it is reporting to on the right. The two are separated by a dash. A repeater serial number of 000000 
indicates the unknown device is no longer reporting to any enrolled repeater.  

 

4.9.2 Removing a Device from the Unknown List 

To remove a device from the unknown list the installer can choose to ignore it. If Ignore is chosen the 
device will be moved to the ignored list and will no longer show an unknown trouble. 

Warning: Do 

not move an unknown device to the ignored list if you cannot identify it as being part of your 
installation. If you are receiving unknown units that you cannot identify which may be from 
another installation, the correct solution is to change the base code of your CP-3500D.

   

To move the device to the ignored list, highlight the desired device and press the ignore soft key. 

Note: Any device appearing on the Unknown Units list will continue to show an unknown unit 
trouble until it has been either ignored or enrolled. The device can only be enrolled after it is 
ignored and then removed from the ignored list. 

 

U n k n o w n   U n it s   C h e c k i n g   I n  

  I g n o r e                                                                                                      

 

 
 

 
 

 

0 2 2 3 d 8   –   0 0 6 3 a f  

                               
       

 

 
 

 
 

 
     

Serial # of the 
unknown unit 

Serial # of the 
repeater that the 
unknown unit is 
communicating 
with  

Summary of Contents for CP-3500D
















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands