P/N IM-C35KD Rev. C
2014 Commercial Wireless Systems International, LLC.
37
4.5.1 Accessing the Relay Setup screen
To access the relay setup screen, press the program soft key on the main system normal screen.
Then scroll down to Relay Setup and press ENTER. The following screen will be displayed.
Highlight the repeater to program and press ENTER. The NAC’s on the CP-3500D panel can be
programmed by selecting Control Panel. If the number of repeaters spans more than one screen
page up and page down soft keys will be present. Use the page up and page down soft keys to locate
the desired repeater then press ENTER. The following screen will be shown for the selected repeater.
The screen will show the default selections unless the selected relay has been previously modified.
The top text line indicates the serial number of the repeater and the specific relay being programmed.
Programming the wireless relay is similar. Choose the wireless relay from the first screen then
advance through each of the 5 relays setting the desired activation and deactivation methods. The
screens are similar to the above except substitute the word repeater with wireless relay.
S e l e c t D e v ic e t o P r o g r a m
0 0 5 c 2 8 RE P E A T E R 3 r d F l r H a l l w a y
1 d c 4 4 8 W i r e l e s s R e l a y B a s e m e n t
Us e UP DO W N t o s c r o l l t h e n p r e s s E NT E R
2 b 5 5 9 0 C o n t r o l P a n e l
R e l a y S e t u p
D e f a u lt s P r e v N e x t
R e p e a t e r 0 0 5 c 2 8 – NA C Re l a y 0 1
N
NA C RL Y 0 1 “ O n ” Z o n e s
O n # 1 O n # 2 O n # 3
Z o n e 0 0 0 0 0 0 0 0 0
Us e Z o n e s 0 0 1 - 8 9 9 F o r A l a r m s
Us e Z o n e s 9 0 0 - 9 9 9 F o r T r o u b l e s
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
NA C RL Y 0 1 “ O n / O f f ” B u t t o n s
Re l a y O n N o n e
Re l a y O f f S i g n a l S i l e n c e
Repeater
being
programmed
Relay being
programmed
Zone entry
fields
Keypad button
selections for
manually
activating and
deactivating
selected relay
