Page 21 of 58
Add the Stone Fascia
The stone fascia is mounted to the wall using a special 2-part bracket. The first
part is mounted onto the wall. The second part is fixed to the stone at the
factory. If the fascia is damaged a new one must be obtained from the factory.
Only the fascia supplied with the fire can be used with FIRE RIBBON. Using
any other fascia will make the render the fireplace dangerous and eliminate any
warranty.
Adding the fascia is a two man job.
•
The stone fascia is very heavy.
•
Remove the wall bracket from the back of the stone fascia by taking out
the screws around the edges.
•
The wall bracket is then positioned on the wall with the flat side against
the wall. With the enclosure positioned correctly the wall bracket should
fit correctly onto the top of the enclosure.
•
The wall bracket must be secured to the wall with plugs and screws.
