CVO Fire Flueless Fire Pod, Technical Manual & User Handbook

Page: 33 / 35

33
Infrared Remote Control
Replacing the battery
4.13 Re-setting the Appliance
Hand Held Remote Unit
To start your appliance, press both buttons on the hand-held remote unit,
hold them down for a minimum of three seconds until the ignition process
begins which will run for 19-20 seconds before it turns onto the main burner.
After the burner has ignited, it can then be switched to high or low using the
button on the right side of the handset.
Wall Mounted Remote Switch
Unlike the hand held unit, you are only required to press one switch. Press the left
switch for 2 – 3 seconds. The ignition sequence will continue for 20 seconds
before the burner is ignited to high flame position. The right button is only for
turning the fire from high to low setting and vice versa.