CVO Fire Fire River, Technical Manual & User Handbook

Page: 22 / 44

Page 22 of 44
Reset the Appliance
Hand Held Remote Unit
To start your appliance, press both buttons on the hand-held remote unit, hold
them down for a minimum of three seconds until the ignition process begins
which will run for 19-20 seconds before it turns onto the main burner. After the
burner has ignited, it can then be switched to high or low using the button on
the right side of the handset.
Wall Mounted Remote Switch
Unlike the hand held unit, you are only required to press one switch. Press the
left switch for 2 – 3 seconds. The ignition sequence will continue for 20
seconds before the burner is ignited to high flame position. The right button is
only for turning the fire from high to low setting and vice versa.