Type of system
(select one)
❏
3 Phase/4 Wire
❏
1 Phase/3 Wire
❏
3 Phase/3 Wire
❏
1 Phase/2 Wire
Phase Rotation
(if Step 1 was 3 Phase, select one)
❏
ABC Rotation
❏
CBA Rotation
Choose Frequency
(select one)
❏
25Hz
❏
50Hz
❏
40Hz
❏
60Hz
Incoming Line-to-Line Voltage
Enter from 100-600 Vac __ __ __
PT Primary Rating
(120 volt secondary)
Enter from 120-500,000 volts
__ __ __ , __ __ __
CT Primary Rating
(5A secondary)
Enter from 5-10,000A
__ __ , __ __ __
GND CT Primary Rating
(5A secondary)
Enter from 5-10,000A
__ __ , __ __ __
Programming Options
(select one)
❏
Faceplate Only
❏
Input3 Key Only
❏
Faceplate & IMPACC (recommended)
❏
Input3 Key & IMPACC
Energy Resolution for Wh, varh, & VAh
(select one)
❏
Kilowatt-hours
❏
Megawatt-hours
Var Sign Convention
(select one)
❏
Lagging vars & PF negative at load
❏
Lagging vars & PF positive at load
Date and Time
Enter date and time if required
__________________
Change Password
Enter new 5 digit password if required
__ __ __ __ __
General Setup Settings Worksheet
13
Quick Start Procedure
(USER’S MANUAL SECTIONS 4-5)
During initial setup of your IQ Analyzer,
use Steps 1 - 5 below after the IQ Analyzer
has been mounted and wired using Sections
4-2 and 4-3, along with Figures 4-9 to 4-34 of
the User’s Manual as a reference.
STEP #1:
Complete the General Setup Settings
Worksheet. This will require an understand-
ing of the electrical system configuration and
transformer ratios.
STEP #2:
Enter the Program Mode of the IQ Analyzer.
If this is an initial startup, use factory default
passwords (10000 or 44444).
(Program, F2, F4)
STEP #3:
Enter General Setup Settings using the F1-F4
PBs from the information on page 13. (An
example is shown on the following pages.)
STEP #4:
Examine, understand and verify Metered
Values. Ensure display matches your system.
STEP #5:
Troubleshoot problems.
Use the guide provided, the Help Mode
and/or the User’s Manual as a reference in
troubleshooting.
Programming
Programming
