WARNING !
Wiring procedures must be performed only by
qualified personnel who are familiar with the
IQ Analyzer and its associated electrical equipment.
Ensure that incoming ac power (or foreign power)
sources are turned off and locked out prior to
performing any electrical work. Failure to do so may
result in serious injury or death, or equipment
damage. The only exception is when connecting/
disconnecting ribbon cables at J2 or J3.
11
Wiring installation for the IQ Analyzer must
follow a suitable Wiring Plan Drawing and
conform to applicable Federal, State and
Local codes.
Wires to the terminal blocks must not be larg-
er than AWG No. 14. Larger wire sizes may
be used on the CT connections when using
appropriate ring terminals.
The following two figures show typical
wiring diagrams. Additional wiring diagrams
are shown in the User’s Manual.
Wiring
Wiring
(USER’S MANUAL SECTIONS 4-3)
