7
NOTE:
For safety reasons, lifting of the adjustable bed must always be performed by two (2)
people; and the unit should always be on a flat surface before opening.
Installation Guide
Setting up your adjustable bed frame
1
2
Open the box and unfold the bed placing it on a flat surface
with the top side facing downward.
Remove the accessory box and cut the orange ties from
inside the bed frame.
Attaching the center support bracket
Move the three sections of the bed closer together. Make
sure the bars and frames are properly aligned at the center.
To connect the three sections, put the center support bracket
over the bars on one side of the bed frame, lining it up with
the pre-drilled holes.
Thread the big knob screw fitted with a spring washer into
the first pre-drilled hole on the bracket and through the bed
frame. Hand tighten the screw to secure it in place.
Do the same for the rest of the holes on the center support
bracket.
1
2
3
4
