11
Installation Guide
Assembling the headboard bracket (optional)
1
Turn the bed frame unit over with the top side facing down.
Remove the leg at the head section of the bed frame by
turning the leg counter-clockwise.
Slide the inner headboard bracket over the hole for the leg
attachment.
Thread the leg back in, turning clockwise. This will secure the
inner headboard bracket between the bed frame and the leg.
Place the open side of the outer headboard bracket onto
the exposed square tube of the inner headboard bracket to
create a tight fit.
Insert a retainer bolt fitted with a washer through the outer
headboard bracket and into the inner headboard bracket.
Tighten the bolt with an Allen key wrench. Leave loose
enough for adjusting.
Repeat steps 2 to 6 to install the brackets on the other side of
the head section of the bed frame.
When the headboard brackets are assembled, make sure
there is a space of 1.5 inches (38.1 mm) to 2 inches (50.8
mm) between the edge of the bed frame and the headboard
brackets.
Securely fasten the headboard bolts (not included with your
parts box) to the end of the headboard bracket assembly.
Turn the bed frame over carefully with the topside facing up.
If you need to adjust the headboard brackets, unscrew
the bolts holding the outer headboard bracket and move
them the necessary distance. Reinstall the bolts and tighten
securely.
2
3
IMPORTANT!
•
Failure to follow the installation steps as they appear in this guide could result in damage to your
adjustable bed.
•
For safety reasons, lifting of the adjustable bed must always be performed by two (2) people; and the
unit should always be on a flat surface.
•
Make sure to position the bottom of the headboard cross member no more than 3 inches (76.2 mm)
between the headboard and the top of the mattress.
4
5
6
7
8
9
10
11
Place your mattress on the adjustable bed surface.
Your adjustable bed and headboard installation is now
complete.
