HB1030E Manual Revision: 7 Page 3 of 28
Product Description
Purpose
Custom Equipment's Hy-Brid Micro-Lift is an aerial work platform designed for compact size, ease of operation,
and operator safety. The purpose of the machine is to position personnel and their necessary tools and materials.
The machine is intended for indoor use (no wind load).
Manufacturer approval is required for any use other than the intended use.
Machine Specifications
Designed to meet or exceed EN280:2001 standards. The classification in EN280:2001 1.4 is Group B, type 3.
The rated life cycles in EN280:2001 5.2.5.3.3 is Light Intermittent Duty (typical use 10 years, 40 weeks per year,
20h per week, 5 load cycles per h).
Working Height (maximum)
16 ft.
4.87 m
Platform Height (maximum)
10 ft.
3 m
Stowed Height
69.5 in.
1.77 m
Lift Capacity (Evenly Distributed):
Slide-Out Deck Capacity (250 lbs.)
750 lbs.
340.2 kg
Manual Force Permitted (Max)
90 lbs.
400 N
Environmental Limitations
Indoor Use Only
For use on level surface only
Temperature
Zero Wind Speed
2º longitudinal, 1º lateral
-4º to 104º F
Zero Wind Speed
2º longitudinal, 1º lateral
-20º to 40º C
Platform Dimensions:
With Slide-Out Deck Retracted
Guard Rail Height
Toe Board Height
Slide-Out Deck Length
25 in. x 60 in. (inside)
45.5 in.
6 in.
30 in.
0.64 mx1.52 m (inside)
1.16 m
0.15 m
0.76m
Vibration 8.2
ft/s
2
max
2.5 m/s
2
max
Platform Entrance
11.8 in.
0.3 m
Overall Length
69.5 in.
177 cm
Overall Width
30 in.
0.76 m
Wheel Base
50.5 in.
1.3 m
Wheel Track
22.625 in.
0.57 m
Turning Radius (Inside)
21 in.
53 cm
Ground Clearance
3 in.
7.6 cm
Machine Weight (Unloaded) (Approx.)
1500 lbs.
680 kg
Drive System (Proportional Electric):
(Fast-80rpm; Slow-32rpm)
Drive Speed (Platform Elevated)
Drive Speed (Platform Lowered)
0-1mph
0-2.5mph
0-0.43 m/s
0-1.12 m/s
Lift/Lower Speed
15/22 sec
15/22 sec
Gradeability 30%
30%
Floor Loading
Minimum Wheel Load
Maximum Wheel Load
Based on Machine Footprint:
Minimum Floor Pressure
Maximum Floor Pressure
73 PSI
110 PSI
113 PSF
170 PSF
504.5 kPa
756.7 kPa
5.43 kPa
8.14 kPa
Tire Size (solid, non-marking)
Front
Rear
10 in.
10 in.
25.4 cm
25.4 cm
Hydraulic Pressure
1300 psi max
8963 kPa max
Hydraulic Fluid Capacity
1.325 gal
5.38 L
Power System-Voltage
24V DC
24V DC
Batteries-Deep Cycle Marine
(2) 12V
(2) 12V
HB1030E Manual Revision: 7 Page 4 of 28
Safety
Safety Symbols
Warnings and instructions that have a direct impact on safety are identified with the following signals:
"DANGER" indicates an imminently hazardous situation,
which, if not avoided,
will
result in death or serious injury.
"
WARNING" indicates a potentially hazardous situation,
which, if not avoided,
could
result in death or serious injury.
"CAUTION" indicates a potentially hazardous situation
which, if not avoided,
could
result in minor or moderate
injury or damage to equipment.
General Rules and Precautions
Custom Equipment, Inc. designed the Hy-Brid Lift self-propelled scissor lift to be safe and reliable. It is intended
for elevating personnel, along with their necessary tools and materials to overhead work locations.
Vibration does not create significant hazards on this machine.
An operator of any type of work platform is subject to certain hazards that cannot be protected by
mechanical means. It is therefore essential that operators be competent, careful, physically and mentally
fit and thoroughly trained in safe operation of this machine.
Although Custom Equipment, Inc. conforms to specified EN: 280 requirements, it is the responsibility of
the owner to instruct operators with the safety requirements made not only by Custom Equipment, Inc.,
but by the various safety boards in your area, as well as additional requirements set forth by EN: 280 If
you come across a situation that you think might be unsafe, stop the platform and request further
information from qualified sources before proceeding.
WARNING
NEVER REACH BETWEEN SCISSORS LINKS
OR PROP UP PLATFORM.
WARNING
STEERING BRACKETS EXTENDING BEYOND
THE SIDES OF THE BASE MAY OCCUR IN
TIGHT TURNING SITUATIONS
TIGHT TURNING WARNING – Potential damage to walls, etc., may occur in tight turning situations due to
the steering brackets extending beyond the sides of the base.
DANGER
FAILURE TO FOLLOW THIS WARNING
WILL CAUSE DEATH OR PERSONAL INJURY
.
WARNING
FAILURE TO FOLLOW THIS WARNING MAY
CAUSE DEATH OR PERSONAL INJURY.
CAUTION
FAILURE TO FOLLOW THIS WARNING
MAY CAUSE INJURY OR DAMAGE EQUIPMENT.