Custom Engineering TG1260 series, User Manual

Page: 79 / 100

2. PRINTER FUNCTIONS
2-62
TG1260/2460
n 3 4 $ B 1 $
[Name] Page length designation and page formatting.
[Format] ASCII ESC C n
Hex 1B 43 n
Decimal 27 67 n
[Range] 14
≤
n
≤
120
[Description] This command sets the length (number of lines) of the page, and paging formatting
begins.
A space of three lines is left at both the top and bottom of the page.
[Notes] • Page formatting can be cleared through the command $1B $4F.
[Default] n = 66
[Reference] $0C, $1B $4F
[Example]
2 n 1 n B 4 $ B 1 $
[Name] Graphic mode printing
[Format] ASCII ESC K n1 n2
Hex 1B 4B n1 n2
Decimal 27 75 n1 n2
[Range] 1
≤
n1
≤
240; n2 = mute data
[Description] This command prints n1 bytes of data in graphic mode. The data bytes are arranged
vertically starting from the left margin, but only the first seven LSBs are significant.
[Notes] After the last data byte, the printer prints, forward feeds the paper (by 21 dots per line)
and graphic mode printing is cleared.
[Default]
[Reference]
[Example]
F 4 $ B 1 $
[Name] Page formatting off
[Format] ASCII ESC O
Hex 1B 4F
Decimal 27 79
[
Description] Cancel page formatting mode
[Notes]
[Default]
[Reference] $1B $43
[Example]
9 6 $ B 1 $
[Name] Total cut.
[Format] ASCII ESC i
Hex 1B 69
Decimal 27 105
[Description] This command enables cutter operation; if there is no cutter, a disabling flag is set any
subsequent cutting commands will be ignored.