2. PRINTER FUNCTIONS
2-3
TG1260/2460
[Default]
[Reference]
$1B $44
[Example]
A
0
$
[Name]
Print and line feed
[Format]
ASCII
LF
Hex
0A
Decimal 10
[Description]
Prints the data in the buffer and feeds one line, based on the current line spacing.
[Notes]
• This command sets the print position at the beginning of the line.
[Default]
[Reference]
$1B $32, $1B $33
[Example]
D
0
$
[Name]
Print and line feed
[Format]
ASCII
CR
Hex
0D
Decimal
13
[Description]
When autofeed is $0D enabled, this command functions in the same way as $0A,
otherwise it is ignored.
[Notes]
• This command sets the print position at the beginning of the line.
[Default]
See autofeed parameter on Setup.
[Reference]
$0A
[Example]
n
4
0
$
0
1
$
[Name]
Transmission of status in real time
[Format]
ASCII
DLE
EOT
n
Hex
10
04
n
Decimal
16
4
n
[Range]
1
≤
n
≤
4, n =17, 20
≤
n
≤
21
[Description]
Transmits in real time the selected status of the printer specified by
n
according to the
following parameters:
n = 1
transmit printer status
n = 2
transmit off-line status
n = 3
transmit error status
n = 4
transmit paper roll sensor status
n = 17
transmit paper status
n = 20
transmit Full Status
n = 21
transmit printer ID ($6D )
[Notes]
• This command is executed even when the reception buffer is full.
The status is transmitted whenever the data sequence $10 $04 n is received.
[Default]
[Reference]
[Example]
n=1: Printer status
